Logo Fenêtre alu Dzao sans rupture de pont thermique Dzao : traditional aluminium casement without thermal break

DZAO® is a « cold » range of traditional aluminium casements allowing the fabrication of very large-dimension chassis without thermal bridge break, particularly combined chassis housing casements, tilt-turn, hoppers….

Coupe 3D Fenêtre alu traditionnelle Dzao sans rupture thermique

Sturdiness and design

Highlights

  • Complete range
  • All kinds of chassis can be created
  • Opening section width 55mm or 58.4mm
  • Efficient water deflector on fixed frame
  • Maximum Dimension up to: W2200 x H2300mm
  • Hidden drainage on opening section
  • Simplified gaskets : saves time
  • Locking rod and handle without base-plate available
  • Joint covers and weather-drips common to whole series
  • Available in all Profils Systèmes’ exclusive colours
  • Colour shades guaranteed up to 25 years

Weather tightness

  • Dimensions W1400 x H1400mm / Results AEV: A*4 - E*8A - V*C5
  • Dimensions W1300 x H2200mm / Results AEV: A*3 - E*9A - V*A3

View our photo book

View online

Acoustic Performance

  • Glazing 38/23 : Ra, tr = 36 dB
  • Glazing 4/6/10 : Ra, tr = 35 dB

Esthetics

  • Factory Spirit® : Straight, sleek lines on all fixed frames and opening sections
  • Classic® : Curved lines with a slight wave giving the profiles a modern aspect
  • Design®  : Curved lines with a slight wave giving the profile its special character

Acoustic Performance

  • Glazing 38/23 : Ra, tr = 36 dB
  • Glazing 4/6/10 : Ra, tr = 35 dB

Esthetics

  • Factory Spirit® : Straight, sleek lines on all fixed frames and opening sections
  • Classic® : Curved lines with a slight wave giving the profiles a modern aspect
  • Design®  : Curved lines with a slight wave giving the profile its special character

Technical details

Fixed Frame

  • Tubular 51mm fixed frame with clip-on weatherdrip available and jamb liners to cover insulation

Opening Section

  • Straight tubular opening section (Factory Spirit® version) inside and outside in 55 and 58,4 mm
  • Curved tubular opening section (Design® and Classic® version) inside and outside in 55 and 58,4 mm

Glazing

  • Single or insulated glazing from 6 to 30mm (50mm with expander) held by 2 EPDM joints and 1 clip-on glazing bead minimum 21mm high (base of groove).